Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SEM IDShred65
Summary of Contents for SEM IDShred65
- Page 1 Operation and Maintenance Manual SEM Model IDShred65 POP-0122 Rev. 0 | Created 7-10-19 – ECN-00477 For service, parts, and customer support, contact us: SECURITY ENGINEERED MACHINERY 5 Walkup Drive • Westborough, MA 01581 service@semshred.com 1-508-366-1488 www.semshred.com...
-
Page 2: Disclaimers
Disclaimers Every care has been taken by the staff of SEM in compilation of the data contained in all training and informational materials (“collateral”) and in verification of its accuracy when published; however, the content of this collateral is subject to change without notice due to factors outside the control of SEM and this collateral should therefore be used as a guide only. -
Page 3: Table Of Contents
Table of Contents Disclaimers ................................2 Safety ..................................4 1.) Before Use ................................5 1.1 Warning Symbols ............................5 1.2 Additional Safety Notes ..........................6 1.3 About Your Shredder ..................Error! Bookmark not defined. 1.4 Installation ..............................6 1.5 Identification and Function of Parts ....................... 7 2.) Operating Instructions ............................ -
Page 4: Safety
19. Immediately stop the shredder by turning off the power and unplugging the power cord if the following situations occur: smoke is emitting, there is an unusual color, or abnormal heat is generating. Contact SEM customer service at the number below. 508.366.1488 | www.semshred.com... -
Page 5: Before Use
1.) Before Use 1.1 Warning Symbols In this manual and on the IDShred65 we have provided the following warning symbols to help prevent any injuries or damages to you or your property. Each symbol is defined below. “Warning”: Serious injuries may result if this symbol is ignored and the shredder is used improperly. -
Page 6: Additional Safety Notes
1.3 About Your Shredder The IDShred65 is a 120V cross cut shredder that is 37ʺ x 19.75ʺ x 20.75ʺ (W x D x H) and weighs 196lbs. It is capable of shredding dog tags and both plastic and metal credit cards with RFID chips through a 2.25”x.15” feed chute to a final particle size of 4mm x 40mm. -
Page 7: Identification And Function Of Parts
1.5 Identification and Function of Parts 2. Gradation Lamp 3. Power Button 4. Stop/Reverse/Restart 1. Feed Opening 5. Breaker/Main Power Switch 8. Display 6. Door 7. Waste Receptacle 1. Feed Opening: Insert material to be shredded. 2. Gradation Lamp: As the machine goes through various functions, the lamp will display different colors. See more in operating instructions and error messages. -
Page 8: Operating Instructions
2.) Operating Instructions 2.1 Start up Ensure that the unit is plugged in and the main power switch is on and press the Power button. The POWER indicator will illuminate, and the gradation lamp will turn a solid blue color. When the READY TO SHRED indicator is illuminated, the machine is ready to begin shredding. -
Page 9: Reverse Operation
After the media has been shredded and gone through the cutting unit, the blades will continue to rotate for approximately ten seconds. For continuous shredding, insert the next piece of media to be shredded within ten seconds of the previous material. To stop the shredding process, press the Stop/Reverse/Restart button. -
Page 10: Unacceptable Media
2.5 Unacceptable Media The IDShred65 is capable of shredding dog tags, metal and plastic cards with RFID. Do not shred the following materials as it may deteriorate shredding capacity, damage the machine, and void warranty: •... -
Page 11: Safety Functions
3.) Safety Functions 3.1 Safety Devices 1. Motor Thermal Overload Protection: When the motor is locked or overloaded for an extended period of time, the motor thermal protection is activated to cut off power. The THERMAL PROTECTION indicator flashes and the gradation lamp is off. Wait until the THERMAL PROTECTION indicator goes off to resume shredding. -
Page 12: Error Messages
3.2 Error Messages 1. Indicators: READY TO SHRED + AUTO RUN SUSPENDED Gradation Lamp: Goes from blue to off. If media or any foreign objects are left in the feed chute (without shredding) for approximately three minutes, the shredder will temporarily cease operation and this error message will be displayed. To correct this error: 1. - Page 13 1. Turn off the breaker. 2. Check the waste basket. If full, empty the basket. 3. Turn on the breaker. If any of these problems can’t be solved with the corrective steps, contact SEM customer service at service@semshred.com. 508.366.1488 | www.semshred.com...
-
Page 14: Maintenance
4.) Maintenance • Be sure to unplug the shredder from its power source before cleaning or performing maintenance. • For your safety, maintenance work should be limited only to cleaning the exterior and or the inside of the shredder cabinet. •... - Page 15 For service, parts, and customer support, contact us: SECURITY ENGINEERED MACHINERY 5 Walkup Drive • Westborough, MA 01581 service@semshred.com 1-508-366-1488 www.semshred.com Follow us on social media: Facebook: https://www.facebook.com/semshred Twitter: https://twitter.com/semsecure Linkedin: https://www.linkedin.com/company/security-engineered-machinery Youtube: https://www.youtube.com/user/datadestruction 508.366.1488 | www.semshred.com...
Need help?
Do you have a question about the IDShred65 and is the answer not in the manual?
Questions and answers