IBM NetVista N2200 Reference Manual page 29

Table 7. NSBxxxx error codes and text messages (continued)
Error code Error message
NSB40510 USB initialization failure.
CompactFlash card messages (NSB51xxx)
NSB51500 File not found on flash
card.
NSB51510 Cannot close file on flash
card.
NSB61500 Token Ring PCI device
not detected.
NSB61510 Token Ring PCI device
soft reset failed.
NSB61520 Token Ring PCI device
initialization timed out.
NSB61530 Token Ring PCI device
initialization not complete.
NSB61569 Token Ring open
command canceled due to
failure.
NSB61610 Token Ring flash contents
not valid.
NSB61620 Token Ring flash contents
not valid.
NSB61639 Token Ring error in loop
back test phase.
NSB61639 Token Ring error in ring
insertion phase.
NSB61649 Token Ring error in
address verification phase.
NSB61659 Token Ring error in
neighbor notification
phase.
What you should do
Disconnect any USB devices from the thin
client and restart the system. If the
symptom remains, replace the thin client
logic unit (see "Replacing the logic unit"
on page 27).
Check the contents of the CompactFlash
card.
Check the contents of the CompactFlash
card.
Token Ring messages (NSB61xxx)
Restart the thin client. If the symptom
remains, replace the thin client logic unit
(see "Replacing the logic unit" on page 27).
Restart the thin client. If the symptom
remains, replace the thin client logic unit
(see "Replacing the logic unit" on page 27).
Restart the thin client. If the symptom
remains, take any actions recommended by
the text messages that accompany this
message. If you still cannot resolve the
problem, replace the thin client logic unit
(see "Replacing the logic unit" on page 27).
Restart the thin client. If the symptom
remains, take any actions recommended by
the text messages that accompany this
message. If you still cannot resolve the
problem, replace the thin client logic unit
(see "Replacing the logic unit" on page 27).
Adapter failed to insert into ring. Perform
any actions recommended by the messages
that accompany this error.
Microcode corruption. Replace the thin
client logic unit (see "Replacing the logic
unit" on page 27).
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Resolving hardware problems
19