Electrical Requirements - Minuteman 260 Series Operation Service Parts Care

ELECTRICAL REQUIREMENTS:

ELECTRICAL REQUIREMENTS: ELECTRICAL REQUIREMENTS:
ELECTRICAL REQUIREMENTS: ELECTRICAL REQUIREMENTS:
This piece of equipment operates on 24 Volt DC.
BA BA BA BA BATTER TTER TTER TTER TTERY Y Y Y Y REQUIREMENTS: REQUIREMENTS: REQUIREMENTS: REQUIREMENTS: REQUIREMENTS:
4 x 6V 220AH P/N 956720
4 x 6V 275AH P/N 956740
BA BATTER BA TTER TTERY Y Y Y Y SER TTER SER SER SERVICE VICE VICE AND INST VICE
BA BA TTER SER VICE
* * * * * Warning: Battery acid can cause burns. When working on or around batteries, wear protective
clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of
batteries.
BA BA BATTER TTERY Y Y Y Y INST TTER TTER INST INSTALLA INST ALLA ALLATION: ALLA
BA BA TTER INST ALLA
1. Disconnect tank drain hose from rear of machine (6).
2. Raise tank assembly by raising rear cover and tilting tank, Figure 1.
3. Install batteries as shown in Figure 2.
CHARGING OF BA CHARGING OF BA CHARGING OF BATTERIES:
CHARGING OF BA CHARGING OF BA
Charging of batteries generates explosive gases. DO NOT CHARGE BATTERIES WHEN OPEN
FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE. Make sure the charger is turned off
before disconnecting it from the batteries. Charge the batteries in a well-ventilated area. Fluid levels
should be checked before and after charging and maintained at the proper levels.
AND INST AND INSTALLA AND INST ALLA ALLATION: ALLA TION: TION: TION:
AND INST ALLA TION:
TION: TION: TION:
TION:
TTERIES: TTERIES: TTERIES:
TTERIES:
2