Installing A Sic - H3C MSR2600-6-X1-GL Installation Manual

Attach the other end of the grounding cable to the grounding strip.
4.
Figure 11 Connecting the grounding cable to the router

Installing a SIC

CAUTION:
SIC interface modules are not hot swappable. Make sure the router is powered off before installing
a SIC.
To install a SIC:
Use a Phillips screwdriver to remove the fastening screws on the filler panel and remove the
1.
filler panel.
Push the SIC slowly into the slot along the guide rails until it makes close contact with the
2.
backplane of the router.
Fasten the captive screws on the SIC.
3.
Figure 12 Installing a SIC
13