Table of Contents
Advertisement
2.1 Initial Inspection
We carefully inspected the MIC-3665 mechanically and electronically before we
shipped it. It should be free of marks and scratches and in perfect working order on
receipt. As you unpack the MIC-3665, check it for signs of shipping damage
(damaged box, scratches, dents, etc.). If it is damaged or fails to meet
specifications, notify our service department or your local sales representative
immediately. Also notify the carrier that was used to ship the product to your
location from our factory or distributor. Retain the shipping carton and packing
material for inspection by the carrier. We will make arrangements to repair or
replace the unit after an inspection. When you handle the MIC-3665, remove it from
its protective packaging by grasping the front metal panel. Keep the anti-vibration
packing. Whenever you remove the card from the PC, store it in this package for
protection.
Warning! Discharge your body's static electric charge by touching the back of the
grounded chassis of the system unit (metal) before handling the board. You should
avoid contact with materials that hold a static charge such as plastic, vinyl and
Styrofoam. Handle the board only by its edges to avoid static damage to its
integrated circuits. Avoid touching the exposed circuit connectors.
7
Advertisement
Table of Contents
