Ppm Display. (Select Number Of Decimals In Ppm Display); Standby Display. (Select Standby Notification) - BRANNSTROM BilgMon488 Instruction Manual

10.11.7 PPM display. (Select number of decimals in ppm display)

Select between one decimal (default) and no decimal when displaying the PPM value.
Press to display the cursor.
Press / to toggle between "ONE DECIMAL" and
"NO DECIMAL".
Save setting by holding
Abort input at any time by pressing
disappears, previous values are filled in).

10.11.8 Standby display. (Select standby notification)

Select between showing current PPM value (default) and showing "STANDBY" in main menu when
unit is in "POWER" mode.
If selected the unit will show "STANDBY" after 5 seconds of inactivity when in "POWER" mode.
Press to display the cursor.
Press / to toggle between "Show PPM" and
"Show STANDBY".
Save setting by holding
Abort input at any time by pressing
disappears, previous values are filled in).
until cursor disappears.
(cursor
until cursor disappears.
(cursor
BRANNSTROM SWEDEN AB
www.brannstrom.se
BilgMon488 Instruction Manual vAD 26(38)
PPM display:
ONE DECIMAL
Standby
Show PPM
display: