Fresh Water Flushing Valve Installation - BRANNSTROM BilgMon488 Instruction Manual

BilgMon488 Instruction Manual vAD 11(38)
8.3.2

Fresh water flushing valve installation

This section is valid for systems using a cleaning solenoid according to Illustration 2: Tube
arrangement alt. 1 or similar installation.
115/230 VAC model: There are two coils delivered with the BilgMon
488, one to be used with 115 VAC (marked 96 V) and one to be used
with 230 VAC (marked 205 V). Be sure to install the proper one for
the chosen voltage.
24 V AC/DC model: Only one coil delivered with this model (marked
24 V).
NOTE: Both models are equipped with a cable and rectifier (in
connection plug for solenoid). The rectifier is necessary for all AC installations.
BRANNSTROM SWEDEN AB
www.brannstrom.se