Setting The Clock; Setting The Lights - Thermador CM302 Care And Use Manual

Oven Features
• Always set the clock immediately after installation
or after a power failure. Once power returns to
the oven, the clock displays the time of day when
power was turned off or lost.
To Set the CLOCK:
1. Select the CLOCK pad.
2. Set the current time of day.
(Example shows 8 o'clock set for
the time of day.)
3. Select START or CLOCK.
• Oven lights turn on automatically when the door is opened and off when closed.
• To set manually, always start by highlighting the oven, whether it is "active" or not.
(Touch the UPPER / LOWER pad to display the "active" oven; flashing outline indicates the active oven.)
• The same LIGHT pad activates the lights in either oven.
• The lights do not operate in the Self-Clean mode.
To manually control the interior oven lights if
either oven is in use:
1. Select the "active" oven by touching once or
twice to highlight oven display.
2. Touch once to turn light on or off.

Setting the Clock

• If 15 seconds elapse between touching the clock
pad or number pads, the mode is automatically can-
celled. Set again.
• The time of day clock can be set when an auto-
matic timed cooking mode is in operation.
Touch
CLOCK
Touch
8
0
0
Touch
START

Setting the Lights

UPPER
LOWER
LIGHT
Page 10
CM Oven Care and Use Manual
You Will See
––:––
8:00
8:00
You Will See
Touch
Touch
SET CLOCK
SET CLOCK
OR