Page 2
IMPORTANT: DO NOT RETURN TO STORE! 1-800-480-6985 For missing parts, damaged parts, technical and assembly questions please call John Louis Home Customer Service at IMPORTANTE: ¡NO LO DEVUELVA A LA TIENDA! Llame al Servicio al cliente local de John Louis al 1-800-480-6985 para aclarar sus dudas sobre pérdidas, daños, asuntos écnicos y ensamblaje.
TANDARD LOSET YSTEM Step 1- Pre-Assembly SSEMBLY NSTRUCTIONS Choose your desired closet configuration from the options provided. Draw your closet interior dimensions on the transparent grid overlay enclosed. Place transparent grid over your desired configuration. Required Tools for Installation READ IMPORTANT NOTES READ IMPORTANT NOTES READ IMPORTANT NOTES READ IMPORTANT NOTES...
Page 4
L-Hooks are placed at each shelf end location and every wall stud in Step 3 - Primary Shelf Locations between (Typically 16 inches on center). Use supplied plastic wall anchors if no stud is present. Center the top screw hole on L-Hook with level line on wall and attach Using the height location measurements for the (A) shelves, measure L-Hooks to wall using #8 1-1/2”...
Page 5
FIG. 5.3 FIG. 7.0 Place shelf onto L-Hooks and Shelf End Bracket. Secure shelf to all L-Hooks using #4 1/2” screws (Fig. 5.4)/ FIG. 7.1 10. Repeat process for each (A) shelf. FIG. 5.4 Place ONE (D) Vertical Support Bar at location provided (Refer to selected configuration layout).
Page 6
11. Line the inside bottom of L-Hook with level line on wall and mark hole Line the inside bottom of L-Hook with lower level line on wall and locations. Attach (2) L-Hooks to wall using #8 1-1/2” screws (Fig. 7.4). mark hole locations.