Related Manuals for John Louis Home JLH-530
Summary of Contents for John Louis Home JLH-530
-
Page 1: Installation Instructions
Installation Instructions 12in. Deep Simplicity Closet Organizer MODEL: JLH-530, JLH-531 www.johnlouishome.com BOOKLET SKU#719... - Page 2 IMPORTANT: DO NOT RETURN TO STORE! For missing or damaged parts, technical or assembly questions, 1-800-480-6985 please call John Louis Customer Service at IMPORTANTE: ¡NO LO DEVUELVA A LA TIENDA! 1-800-480-6985 Llame al servicio al cliente local de John Louis al para aclarar sus dudas sobre pérdidas, daños, asuntos écnicos y ensamblaje.
- Page 3 Contacter For questions concerning missing or damaged parts, technical specs and / or assembly help, please contact John Louis Home Customer Service at: Si tiene preguntas sobre partes faltantes o dañadas, especificaciones técnicas o asistencia para el armado, comuníquese con el Servicio al Cliente de John Louis Home: Pour toute question relative à...
- Page 4 IMPORTANT - Read Before Assembly STEP 2 - Attaching Garment Bars Assembly instructions are written for 8 ft. configuration A. 4ft. garment bars are used for double hang. On the pilot hole side of the bar, measure in 4 in. from the end. All assembly processes are the same for each configuration Mark location &...
-
Page 5: Step 4 - Tower Assembly
STEP 3 - Marking Measurements Locate the 3 main height locations for your configuration. Measure up & mark the 84 in. shelf location. Mark the 42 in. shelf location. Mark the 72 in. shelf location. Draw a 6 ft. long level line out from wall end at 84in. location. Draw a 4ft. - Page 6 Position shelf end template onto side wall. 14. Repeat for opposite side. Align template line with adjacent wall line. 15. Secure brackets to tower using #6 3/4 in. screws. Level template. Mark required Shelf End position for required depth (12in. or 16in. depth). Secure Shelf End using #8 - 1 1/2in.
- Page 7 14. Plumb level tower side. STEP 6 - Installing Lower Shelf 15. Mark tower bracket hole locations on wall. 16. Remove shelf and tower. On the lower level line space shelf mounting L-clip hardware equidistant in 17. Align shelf end hardware with the mark on the tower & mark screw hole the following manner: locations.
- Page 8 STEP 7 - Installing Long Hang Shelf On the 72in. level line space shelf mounting L-clip hardware equidistant in the following manner: • 2 L-clip hardware within the 24in. shelf location Center the top screw hole of the shelf mounting L-clip hardware with the level line &...
- Page 9 18. On the pilot hole side of the bar, measure in 4 in. from the end. 19. Mark location & repeat for other end. 20. Align side of bar spacer with the mark. 21. Secure with #8 1in. screw. 22. Repeat at each marked location. Position shelf end template onto tower side.
-
Page 10: Step 9 - Final Touches
Using the lower hole location on the bracket, drill a pilot hole using a 1/8 in. STEP 8 - Installing Adjustable Shelves drill bit. Remove the shelf end bracket. Select 24in. adjustable shelf & insert shelf pins into shelf ends. Adjustable shelves may be placed anywhere within the tower.