Haier AU96NFTAHA Service Manual page 62

C. Centrol controller
(1) Check display operation
Pressing check button can confirm inspection code. Refer to item 2 for reading method of inspection code:
Check button
Press it for 0.5 second to display inspection codePress it for 3 seconds to reset the indoor unit (whenthe indoor unit is in t
LCD displays the reason of "standby"
Indoor unit group with cool mode being set due to prior to heat control
When the capability of indoor unit group is overloaded
Selection of indoor unit group whose running mode is opposite to the running
mode (cold/heat) and switch setting content of outdoor unit
When the phase sequence of power wiring of outdoor unit is wrong
®
MONITOR SET
UNIT ALL
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
MODE FAN
AUTO CENTRAL
FAN ONLY
COOL HIGH LOCKED
DRY MED STANDBY
HEAT LOW FILTER
AUTO FIX TIMER
TEMP CHECK LOUVER
MANUAL
1
C
2
F
CENTRAL CONTROLLER
ON
OFF
MONI/SET UNIT SEL
ON OFF
MODE FAN
TEMP
CHECK FILTER
Reset button
When using it, press the button in thehole, the power
(clear all information)
59
: http://splitoff.ru/tehn-doc.html
ALL
CENT/LOCK
LOU
TIMER