Haier AU96NFTAHA Service Manual page 60

B. Standard remote controller (with time-meter)
(1) Check display operation
Pressing check button can confirm inspection code. Refer to item 2 for reading method of inspection
code:
LCD displays the reason of "standby"
Indoor unit group with cool mode being set due to prior to heat control
When the capability of indoor unit group is overloaded
Selection of indoor unit group whose running mode is opposite to the running mode
(cold/heat) and switch setting content of outdoor unit
When the phase sequence of power wiring of outdoor unit is wrong
Check button
Press it for 0.5 second to display inspection
code
Press it for 3 seconds to reset the indoor unit
(when the indoor unit is in the state of stopping
running due to its abnormality)
Press it for 10 seconds to clear inspection
information in addition to resetting the indoor
unit.
®
MODE FAN
CENTRAL
AUTO OPERATION
FAN ONLY
COOL HIGH
STANBY
DRY MED
PRENEAT
LOW
HEAT
DEFROST
FIX
AUTO FILTER
CHECK
TEMP LOVER
UNIT DEMAND MANUAL
C
F
TIMER CONT. OFF ON ADDRESS
AFTBR H M
57
REMOTE CONTROLLER
MODE FAN LOU
TEMP
TIMER
CHECK FILTER
ON/OFF
Reset button
When using it, press the button in the hole,
the power of remote controller will be reset
(clear all information)
: http://splitoff.ru/tehn-doc.html