Haier AU96NFTAHA Service Manual page 128

AU96NFTAHA
1. Replacing and inspection of electrical part
2. Replacing of shaft airflow
fan and fan motor
(1) Remove the front panel (m6x4, M4x1);
(2) Remove the electric control cover (M4 x 4);
<Inspection>
(3) Remove the pressure sensor cover (M4 x1);
(4) Remove the installation plate of the pressure sensor (M4 x 3);(5) Remove the whole
(6) Remove the electric control box (M4 x 4).
<lifting out after pushing>
Installation plate of
pressure sensor
Cover of electric
control box
(1) Remove the protecting wire net (M 4 x 2, two portions);(2) Release the fixing screw f
125
: http://splitoff.ru/tehn-doc.html
Cover of pressure sensor