Before You Start - LEGRAND Radiant Series Installation Manual

before you start

Review this guide in its entirety before beginning device installation. Consult an
electrician with any questions or if you are unsure of your abilities.
DWarning: Incorrect installation could
result in death, serious injury, and/or
damage to your home or devices:
• For dry, indoor use only.
• Connect the smart remote switch to a
120 VAC, 60 Hz power source ONLY.
• The remote switch pairs ONLY with the
smart switch (WTRL10) and plug‑in
switch (WTP10) for multi‑location
control.
Visit the Legrand website at
about your device.
• The remote device does NOT connect to
• Always use copper wire to install the
• Install in a non‑metallic electrical box
www.legrand.us/radiant/smart‑lighting.aspx
any lighting loads. It is powered by your
electrical wiring and uses a wireless
connection to control its paired devices.
smart remote switch and follow all
applicable local and national electrical
codes.
to protect wireless signal strength.
to learn more
3