before you start
Review this guide in its entirety before beginning device installation Consult an
electrician with any questions or if you are unsure of your abilities
DWarning: Incorrect installation could
result in death, serious injury, and/or
damage to your home or devices:
• For dry, indoor use only
• Connect the smart remote switch to a
120 VAC, 60 Hz power source ONLY
• The remote switch pairs ONLY with
the smart switch (HKRL10) for multi-
location control
Visit the Legrand website at
your smart device
• The remote device does NOT connect to
• Always use copper wire to install the
• Install in a non-metallic electrical box
www legrand us/radiant/homekit aspx
any lighting loads It is powered by your
electrical wiring and uses a wireless
connection to control its paired devices
smart remote switch and follow all
applicable local and national electrical
codes
to protect wireless signal strength
to learn more about
3