NEC S1300 User Manual page 65

3-10 Adding and Removing Components
This Manual:http://www.manuallib.com/nec/s1300ug-disk-array-unit-user-guide.html
Figure 3-9. Closing the Ejector.
12. Push in on the ejector until the controller is firmly seated in the chassis.
See Figure 3-10. Secure the ejector with the screw previously removed.
See Figure 3-4.
Figure 3-10. Securing the Ejector.
13. Connect the host and disk enclosure (if applicable) cables to the controller.