Svp Service Processor - NEC S1300 User Manual

SVP Service Processor

Figure 1-12 shows the features and indicators located on the rear of the SVp service
processor.
A
B
C
D
E
F
G
1-22 Disk Array Unit Overview
This Manual:http://www.manuallib.com/nec/s1300ug-disk-array-unit-user-guide.html
A
B
C
D
E
Ether (Ethernet connector)
(10/100BASE-T)
connector
UPS connector For the configuration in which the device receives AC power from UPS
(UPS0/UPS1 (uninterruptible power supply), the signal cable connector is used to
connector) connect the DAU with the UPS.
CACHE FLUSH This switch, when pushed, saves the cache data to the disk.
switch
(pushbutton
switch)
FLT LED (FAULT This LED, when lit, shows a fault occurred in the SVR.
LED)
When this LED flashes during the scheduled stop, the Write Back error
has occurred.
CFL LED This LED, when lit, indicates that data is being saved from the cache to
the disk.
RDY LED
This LED, when lit, shows the service processor (SVR) is
(READY LED)
operating in a normal state.
LINK LED (TX/RX This LED lights green when transmission/reception of data is being
LED) transferred to and from a network.
Figure 1-12. SVP Service Processor
F
G