Connecting The Dau To Uninterruptible Power Supplies - NEC S1300 User Manual

Connecting the DAU to Uninterruptible Power
Supplies
This Manual:http://www.manuallib.com/nec/s1300ug-disk-array-unit-user-guide.html
Figure 2-12 shows the connection of a DAU to uninterruptible power supplies
(UPS). When the DAU is connected to a UPS, the system continues to operate
in the event of an unexpected power failure or momentary AC power
fluctuation.
OUTPUT 1
To power
board
OUTPUT 2
OUTPUT 1
To power
board
OUTPUT 2
Figure 2-12. Connection the DAU to a UPS
Disk Array Unit
AC POWER
Straight cable
AC POWER
Setting Up The DAU 2-15