NEC S1300 User Manual page 51

2-14 Setting Up The DAU
This Manual:http://www.manuallib.com/nec/s1300ug-disk-array-unit-user-guide.html
If the power cords supplied with the DAU are not compatible with the AC
outlet in the region, obtain a suitable power cord that meets the following
criteria.
!
The power cord must be rated for the available AC voltage and have a
current rating that is at least 125% of the current rating of the DAU.
!
The power cord connector that plugs into the wall outlet must be
terminated in a grounding-type male plug designed for use in the region.
It must have certification marks showing certification by an agency
acceptable in the region.
!
The power cord connector that plugs into the DAU must be an IEC- type
CEE-22 female connector.
!
The power cord must be less than 1.8 meters (6.0 feet) long.
!
The DAU shipped with a power cord for each power supply.
Do not attempt to modify or use the supplied AC power cord
if it is not the exact type required.
WARNING