Change Ringtone - Cisco 8800 Series Quick Start Manual

Place a Call with a Headset
1. Plug in a headset.
2. Enter a number using the keypad.
3. Press Headset
Place a Call with the Speakerphone
1. Enter a number using the keypad.
2. Press Speakerphone
Mute Your Audio
1. Press Mute
2. Press Mute again to turn mute off.
Listen to Voice Messages
Press Messages and follow the voice prompts. To
check messages for a specific line, press the line
button first.
Forward All Calls
1. Press the Settings key
2. Scroll and select User Preferences
3. Scroll and select Call Preferences
4. Enter your forwarding number into the applicable
forwarding option (FORWARD ALL NUMBERS/
BUSY/NO ANSWER
Cisco IP Phone 8800 Series Multiplatform Phones
Adjust the Volume in a Call
Press Volume
handset, headset, or speakerphone volume when
the phone is in use.
Adjust the Ringtone Volume
Press Volume
ringer volume when the phone is not in use.

Change Ringtone

1. Press Applications
2. Select User preferences > Audio preferences >
Ext (N)- Ring tone, where n= extension number.
3. Scroll through the list of ringtones and press Play
to hear a sample.
4. Press Select and Set to save a selection.
5. Press
Adjust the Screen Brightness
1. Press Settings
2. Select User preferences > Screen preferences.
3. In the Display brightness field, enter a value for
the level of brighness.
4. Press Set.
left or right to adjust the
left or right to adjust the
to exit.
Quick Start Guide
User Guide
View the full User Guide at
http://knowledge.epiknetworks.com/articles/FAQ/
Cisco-8800-User-Guide