Internal Functions And Initial Setup - Intelligent Weighing Technology AHS Series Operation Manual

4. INTERNAL FUNCTIONS AND INITIAL SETUP

SETTING PROCEDURES AND KEY FUNCTIONS
●
Press and hold the MODE key and press the ON/ZERO key.
Release the MODE key, then the display shows F1.
●
Use MODE key to scroll through the internal setting menu and
the HOLD key to enter the setting.
●
Use HOLD key in the sub-setting to scroll through available
options. Press MODE key to confirm.
●
Press ON/ZERO key in the Function menu to save changes.
Changes are saved after a beep sound is produced.
FUNCTION MENU OF INTERNAL SETTINGS
FUNCTION FUNCTION DESCRIPTION
F0 Initial Zero range
F1 For Qualified Technical Personnel Only
F2 LCD segment check and software version information
F3 For Qualified Technical Personnel Only
F4 Auto Power Off Function
F5 RS-232 Baud Rate
F6
Digital Motion Filter
F7 Serial Output Mode
F9 Auto Tare Function
F12 HOLD Function
Initial Zero Range (F0)
Under this function, user can set initial zero range. The scale is
equipped with 5 selections:
Zero0 -> Zero1 -> Zero2 -> Zero3 -> Zero4