Attaching The Lashing Strap - Powerfix Profi 314158 Operation And Safety Notes

˜ Attaching the lashing strap
HG04646 / HG04647:
HG04648:
14 GB
Fasten the hooks on both sides. Insert the
free end of the strap through the slot in the
ratchet. Pull through the ratchet until it sits
snug around the load.
Tighten the strap by pumping the handle up
and down until the strap is tight. Then, fully
close the handle.
For HG04646: Before pumping: Pull the
quick release button to unlock the handle.
After pumping: Lock the handle by pulling the
quick release button.
Fasten the hooks on both sides. Insert the
free end of the strap through the slot in the
ratchet. Pull through the ratchet until it sits
snug around the load.
Tighten the strap by pumping the handle up
and down until the strap is tight. Then, fully
close the handle.