Technical Specifications - Victron energy BlueSolar PWM-Pro Series Manual

7. Technical specifications

Battery voltage
Rated charge
current
Automatic load
disconnect
Maximum solar
voltage
Self-consumption
DEFAULT SETTINGS
Absorption charge
Float charge
Equalization charge
Low voltage load
disconnect
Low voltage load
reconnect
Load output
ENCLOSURE & ENVIRONMENTAL
Battery temperature
sensor
Temperature
compensation
Operating
temperature
Cooling
Humidity
Enclosure
Grounding
Overall dimensions
Mounting hole size
Terminal size
Weight
Mounting
STANDARDS
Safety
EMC
1) For 12 V use 36 cell solar panels
For 24 V use 72 cell solar panels, or 2x 36 cell in series
7
BlueSolar PWM-Pro charge controller 12/24V
5 A /10 A
12/24V Auto Select
5 A / 10 A
28 V / 55 V (1)
14,4 V / 28,8 V
13,8 V / 27,6 V
14,6 V / 29,2 V
11,1 V / 22,2 V
12,6 V / 25,2 V
Manual control + low voltage disconnect
-30 mV / °C resp. -60 mV / °C
(if temperature sensor installed)
-35℃ to +50℃
Natural convection
≤95% (non condensing)
Positive grounding
138x70x37 mm 160x82x48 mm
5.4x2.7x1.4 inch 6.3x3.2x1.9 inch
Φ 4,3 mm Φ 4,3 mm
2
4 mm 10 mm²
0,13 kg 0,3 kg
Vertical wall mount, indoor only
IEC 62109-1
EN 61000-6-1, EN 61000-6-3, ISO 7637-2
20 A
20 A
Yes
8 mA
Optional
IP30
200x100x57 mm
7.9x4.0x2.3 inch
Φ 4,5 mm
10 mm²
0,5 kg
30 A
30 A