Specifications - Victron energy BlueSolar MPPT 150/35 Manual

5. Specifications

BlueSolar charge controller
Battery voltage
Maximum battery current
Maximum PV power, 12V 1a,b)
Maximum PV power, 24V 1a,b)
Maximum PV power, 48V 1a,b)
Maximum PV open circuit voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Data communication port and
remote on/off
Colour
Power terminals
Protection category
Weight
Dimensions (h x w x d)
1a) If more PV power is connected, the controller will limit input power to
500 W resp. 1000 W, resp 2000 W
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V.
10
12/24/48 V Auto Select (36 V: manual)
500 W (MPPT range 15 V to 130 V)
1000 W (MPPT range 30 V to 130 V)
2000 W (MPPT range 60 V to 130 V)
Less than 0,1 mA
Default setting: 14,4 V / 28,8 V / 57,6 V
Default setting: 13,8 V / 27,6 V / 55,2 V
multi-stage adaptive (eight preprogrammed algorithms)
-16 mV / ° C resp. -32 mV / ° C
Battery reverse polarity (fuse)
Output short circuit
Over temperature
-30 to +60° C (full rated output up to 40° C)
95 %, non-condensing
See the data communication white paper on our website
ENCLOSURE
Blue (RAL 5012)
13 mm² / AWG6
IP43 (electronic components)
IP 22 (connection area)
130 x 186 x 70 mm
MPPT 150/35
35 A
150 V
98 %
VE.Direct
1,25 kg