Step 5 - Install The Plugs And Glass Supports - Insignia NS-HF2005 Assembly Manual

NS-HF2005

STEP 5 - Install the plugs and glass supports.

You'll need
G Rubber plug
F Adjustable glass support
(16)
(4)
1 Insert four adjustable glass supports (F) into the holes on the tops of the upper front and back crossbars (2 and 3), two
on each crossbar.
2 Insert eight rubber plugs (G) into the holes in the middle frame (4), four on each side.
3 Insert eight rubber plugs into the holes in the lower frame (5), four on each side.
www.insigniaproducts.com 9