ONE-YEAR LIMITED WARRANTY ..............13 Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-HF2005 represents the state of the art in TV stand design and is designed for reliable and trouble-free performance.
NS-HF2005 Features • Supports TVs up to 75" (190.5 cm) or 120 lbs (54.4 kg) • Integrated cable management system keeps cables organized • Modern metal and glass design looks great with any décor • Steel frame construction for strength and durability •...
66" Metal & Glass TV Stand Stand hardware LABEL DESCRIPTION QTY. LABEL DESCRIPTION QTY. Rubber plug Floor leveler 6 × 28 × 16 mm Crossbar end cap Allen bolt 6 × 35 × 10 mm Back frame end cap Allen bolt (pre-assembled) 6 ×...
NS-HF2005 Assembly instructions WARNING: You need two people to assemble your TV stand. STEP 1 - Install the floor levelers. You’ll need A Floor leveler (4) Inside Inside 1 Side frame (2) 1 Lay a side frame (1) on its side, then screw a floor leveler (A) into each of the frame legs.
66" Metal & Glass TV Stand STEP 2 - Attach the upper crossbars. You’ll need B 6 × 28 × 16 mm Allen bolt 2 Upper back crossbar (1) Inside Inside 1 Side frame (2) E Allen wrench (1) 3 Upper front crossbar (1) CAUTION: Do not fully tighten the bolts until the end of step 6.
NS-HF2005 STEP 3 - Install the middle and lower shelf frames. You’ll need 4 Middle frame (1) 5 Lower frame (1) B 6 × 28 × 16 mm Allen bolt E Allen wrench (1) CAUTION: Do not fully tighten the bolts until the end of step 6.
66" Metal & Glass TV Stand STEP 4 - Install the back frame. You’ll need 6 Back frame (1) C 6 × 35 × 10 mm Allen bolt D 6 × 41 × 10 mm flat head E Allen wrench (1) Allen bolt (2) 1 Make sure that the smooth side of the back frame (6) is facing the front of your stand.
NS-HF2005 STEP 5 - Install the plugs and glass supports. You’ll need G Rubber plug F Adjustable glass support (16) 1 Insert four adjustable glass supports (F) into the holes on the tops of the upper front and back crossbars (2 and 3), two on each crossbar.
66" Metal & Glass TV Stand STEP 6 - Install the top shelf. You’ll need 7 Top glass shelf (1) C 6 × 35 × 10 mm Allen bolt E Allen wrench (1) 1 Place the top glass shelf (7) on top of your stand with the holes facing down. 2 Insert four 6 ×...
NS-HF2005 STEP 7 - Install the lower shelves and the crossbar end caps. You’ll need H Crossbar end cap (4) 8 Lower glass shelf (2) 1 Place the lower glass shelves (8) on the middle and lower frames. Make sure that the black paint on the edges of the shelves faces down.
66" Metal & Glass TV Stand Anti-tip safety strap installation instructions Note: We recommend that you install the anti-tip strap as a safety precaution. You’ll need WA 4.5 × 10 × 8 mm WB 4 × 25 × 8 mm WC Plastic socket WD Mounting WE Plastic mounting...
During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts.