3.5
Installing the Wall Switch
1. Using your hands, slide the Wall Switch off the mounting
plate.
2. If you have an existing Wall Switch with a junction box
installed, install the mounting plate over the junction
box using the oblong holes on the mounting plate. Make
sure you install the mounting plate with the arrow facing
upwards.
3. If you do not have an existing junction box, simply install
the mounting plate to the drywall. Using the included
drywall anchors and screws, mount the plate onto the
drywall through the four mounting holes.
4. OPERATION
4.1
Operating the Wall Switch
Timer Button
•
The top button on the switch controls the Timer
functionality of the fan.
•
This button must be pressed for the fan to turn on.
•
Button Presses:
One Press: 1 Hour
Two Presses: 2 Hour
Three Presses: 4 Hours
Four Presses: 8 Hours
Speed Button
•
The bottom button on the switch controls the speed
functionality of the fan.
One Speed Fan
• First press: ON
8
1 2 4 8 12
H
M
L
Five Presses: 12 Hours
Six Presses: Continuous On
Seven Presses: Off
Two Speed Fan
Three Speed Fan
• First press: HIGH
• First press: HIGH
• Second press: LOW
• Second press: MED
• Third press: Low
1 2 4 8 12
H
M
L