QuietCool GA ES-1500 Owner's Manual
  1. Manuals
  2. Brands
  3. QuietCool Manuals
  4. Fan
  5. GA ES-1500
  6. Owner's manual

QuietCool GA ES-1500 Owner's Manual

Garage fans
Hide thumbs Also See for GA ES-1500:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S GUIDE
GARAGE FANS
GX ES-1100
GA ES-1500
!
DO NOT THROW AWAY!
SERIAL NUMBER FOR FAN IS LOCATED ON THE BACK COVER OF THE OWNER'S GUIDE.
LEAVE WITH HOMEOWNER

Advertisement

Table of Contents
loading

Related Manuals for QuietCool GA ES-1500

Summary of Contents for QuietCool GA ES-1500

  • Page 1 OWNER’S GUIDE GARAGE FANS GX ES-1100 GA ES-1500 DO NOT THROW AWAY! SERIAL NUMBER FOR FAN IS LOCATED ON THE BACK COVER OF THE OWNER’S GUIDE. LEAVE WITH HOMEOWNER...

  • Page 2: Table Of Contents

    2. INSTALLATION ......... . . 5 2.1 Installing GA ES-1500 ....... . . 5 2.2 Installing GX ES-1100 .

  • Page 3: System Overview

    The QuietCool Garage Fans offer great ventilation options for your garage, man cave, or workshop. We offer the GA ES-1500 Garage Whole House Fan to ventilate both your garage and attic We also offer the GX ES-1100 to ventilate your garage only, with a wall mount design.

  • Page 4: System Venting Requirements

    Venting plays a very significant role in the performace of QuietCool fans. QuietCool recommends a mini- mum of 1 SQ. FT. of venting for every 750 CFM in the QuietCool system. If an attic has at least 1:750 attic venting, the QuietCool system will operate efficiently and effectively. If an attic has less than 1:750 attic venting, the system may not operate as efficiently, or effectively, as it could with 1:750 attic venting.

  • Page 5: Installation

    ABOVE CEILING FOR INSTALLATION OF GA MODEL FANS. ALWAYS FOLLOW LOCAL BUILDING CODES. Determine in which area you would like to install your QuietCool Garage Attic Fan. Now it’s time to find the exact location using a stud finder or by going up into the attic and finding the location.

  • Page 6: Installing Gx Es-1100

    INSTALLING THE GX ES-1100 Determine in which area you would like to install your QuietCool Garage Exterior Mount Fan. Now it’s time to find the exact location using a stud finder. Locate the wall studs and mark the location for the fan to be installed (see Figure 2.2A). One side of the cut out should be directly next to a wood member for proper fan mounting and support.
  • Page 7 Figure 2.2A Figure 2.2B Figure 2.2C Figure 2.2D Figure 2.2E Figure 2.2F Figure 2.2G Figure 2.2H Figure 2.2I Figure 2.2J QUIETCOOLSYSTEMS.COM...

  • Page 8: Wiring

    6. In the fan’s junction box, tie the black wire from the fan to the taped white wire. 7. Tie the two remaining black wires together. Then, tie the remaining copper wires together. Figure 3.1A Ground the fan to the junction box using the green ground screw Junction 14-2 Wire 14-2 Wire Power Source 1-888-QUIETCOOL...

  • Page 9: Wiring Ga Es-1500 With Rf Control

    GA ES-1500 WIRING WITH RF CONTROL 1. Using a wire nut, connect the black wire from the power source to the black wire from the Hub. 2. Connect the white wire from the power source and the white wire on the fan to the white wire from the Hub.

  • Page 10: Fan Hub Led Indicators

    If the Dip Switch is not configured correctly, all the indicators on the Hub will stay solid • when the Hub is powered on. Please switch off power and re-configure the Dip Switch as shown in Figure 3.2A on pg. 9. 1-888-QUIETCOOL...

  • Page 11: Pairing The Wall Switch

    PAIRING THE WALL SWITCH 1. Using a flat-head screwdriver, remove the front cover off the wall switch. 2. Install the included AAA batteries into the switch. All the LED indicators will light up indicating that the switch has power. Replace the front cover. 3.

  • Page 12: Installing The Wall Switch

    If no button press is detected for 10 seconds, the Wall Switch will • enter sleep mode. Pressing either button will wake the switch and display the current status. In Sleep Mode, all LED indicators will be off. • 1-888-QUIETCOOL...

  • Page 13: Frequently Asked Questions

    LED STATUS INDICATORS OF WALL SWITCH If all LED indicators on the Wall Switch come on after three seconds of pressing one of the buttons, • this means the Wall Switch is failing to connect to the Hub. You will need to move the switch closer to the Hub to ensure proper communication.
  • Page 14 No, in the current configuration the RF Control cannot connect to a smart home system. There are systems on the market that take RF signal and translate them to a smart home system, but they have not been tested and may not work reliably. 1-888-QUIETCOOL...

  • Page 15: Warranty

    GARAGE FAN LIMITED WARRANTY QC Manufacturing Inc. extends this warranty to the original purchaser of the following QuietCool Specialty Series Fans - GA ES-1500 and GX ES-1100 - installed and used in a residence under normal conditions within the United States: A.
  • Page 16 Rev. 10/5/20 FAN SERIAL NUMBER INFORMATION RETAIN FOR YOUR RECORDS. SERIAL NUMBER IS REQUIRED FOR WARRANTY PURPOSES. 1-888-QUIETCOOL | WWW.QUIETCOOLSYSTEMS.COM...

This manual is also suitable for:

Gx es-1100

Table of Contents