Installing The Wall Switch; System Operating Instructions; Operating The Wall Switch - QuietCool GA ES-1500 Owner's Manual

3.5

INSTALLING THE WALL SWITCH

1. Using your hands, slide the Wall Switch off the
mounting plate.
2. If you have an existing Wall Switch with a junction
box installed, install the mounting plate over the junction
box using the oblong holes on the mounting plate. Make
sure you install the mounting plate with the arrow
facing upwards.
3. If you do not have an existing junction box, simply
install the mounting plate to the drywall. Using the
included drywall anchors and screws, mount the plate
onto the drywall through the four mounting holes.

4. SYSTEM OPERATING INSTRUCTIONS

4.1

OPERATING THE WALL SWITCH

TIMER BUTTON
The top button on the switch controls the Timer functionality of the
•
fan.
This button must be pressed for the fan to turn on.
•
To turn the fan off, you must cycle through the time settings until
•
the lights turn off.
SPEED BUTTON
The bottom button on the switch controls the speed functionality of
•
the fan.
WALL SWITCH SLEEP MODE
If no button press is detected for 10 seconds, the Wall Switch will
•
enter sleep mode. Pressing either button will wake the switch and
display the current status.
In Sleep Mode, all LED indicators will be off.
•
12
1 2 4 8 12
H
M
L
1 2 4 8 12
H
M
L
1-888-QUIETCOOL