QuietCool GA ES-1500 Owner's Manual page 11

Wall Switch Sleep Mode
•
If no button press is detected for 10 seconds, the Wall Switch will enter sleep mode. Pressing either button will
wake the switch and display the current status.
•
In Sleep Mode, all LED indicators will be off.
LED Status Indicators of Wall Switch
•
If all LED indicators on the Wall Switch come on after three seconds of pressing one of the buttons, this means
the Wall Switch is failing to connect to the Hub. You will need to move the switch closer to the Hub to ensure
proper communication.
•
If all the Timer LED indicators are off and one of the Speed LED indicators are on, this means you have not set
the time for the fan to run and the fan will not operate. Simply press the Timer button to turn the fan on and
set the fan runtime.
•
If only one of the Timer LED indicators is on and only one of the Speed LED indicators is on, the fan is running at
the indicated speed and timer level.
•
If all the Timer LED indicators are on and only one of the Speed LED indicators are on, the fan is running in
Continuous On mode at the indicated speed level. The fan will continue to run until you press the Timer button
to turn it off.
Notes on Operation
•
In order for the fan to run, a Timer selection MUST be made. When the Timer status is off (no LED indicators lit),
you can still change the Speed setting. The Speed setting will take effect once the Timer selection is made.
1-888-QUIETCOOL 9