Download Table of Contents Print this page

Important Information - NEC AccuSync AS221F User Manual

Desktop monitor


Table of Contents

Important Information

To prevent fire or shock hazards, do not expose this unit to rain or moisture.
Do not connect or disconnect this product during an electrical storm.
Refrain from opening the cabinet as there are high voltage components inside. Refer servicing to qualified service personnel.

Please use the power cord provided with this display in accordance with the power cord table. If a power cord is not supplied
with this equipment, please contact NEC. For all other cases, please use the power cord with the plug style that matches the
power socket where the monitor is located. The compatible power cord corresponds to the AC voltage of the power outlet and
has been approved by, and complies with, the safety standards in the country of purchase.
This equipment is designed to be used in the condition of the power cord connected to the earth. If the power cord is not
connected to the earth, it may cause electric shock. Please make sure the power cord is earthed properly.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.
Plug Type
North America
Plug Shape
* When operating the monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the
AC power outlet being used.

This product can only be serviced in the country where it was purchased.
The intended primary use of this product is as an Information Technical Equipment in an office or domestic environment.
The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.
Copyright Information
Windows is a registered trademark of Microsoft Corporation.
NEC is a registered trademark of NEC Corporation.
DisplayPort and DisplayPort Compliance Logo are trademarks owned by Video Electronics Standards Association in the
United States and other countries.
ErgoDesign is a registered trademark of NEC Display Solutions, Ltd. in Austria, Benelux, Denmark, France, Nermany, Italy,
Norway, Spain, Sweden, U.K.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Adobe and the Adobe logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
All other brands and product names are trademarks or registered trademarks of their respective owners.

(1) The contents of this user's manual may not be reprinted in part or whole without permission.
(2) The contents of this user's manual are subject to change without notice.
(3) Nreat care has been taken in the preparation of this user's manual; however, should you notice any questionable points, errors or
omissions, please contact us.
(4) The image shown in this user's manual is indicative only. If there is inconsistency between the image and the actual product,
the actual product shall govern.
(5) Notwithstanding articles (3) and (4), NEC will not be responsible for any claims on loss of profit or other matters deemed to result
from using this device.


Table of Contents

This manual is also suitable for:

Accusync as241f

Table of Contents