AudioCodes Gateway & Session Border Controller Series Hardware Installation Manual page 3

Notice
Caution Electrical Shock: Do not open or disassemble this device. The device carries
high voltage and contact with internal components may expose you to electrical shock
and bodily harm.
The device must be installed and serviced only by qualified service personnel.
For deployment in Finland, Sweden and Norway, the device must be installed only in
restricted access locations that are compliant with ETS 300253 guidelines where
equipotential bonding has been implemented.
Disconnect the device from the mains and Telephone Network Voltage (TNV) before
servicing.
Related Documentation
SBC-Gateway Series Release Notes for Latest Release Versions
SBC-Gateway Series Release Notes for Long Term Support Versions
Mediant 500 E-SBC User's Manual
Gateway and SBC CLI Reference Guide
Document Revision Record
LTRT
10388
10389
10390
10391
10392
10393
10394
Max. power consumption updated.
Status LED flashing for upgrade; miscellaneous formatting.
Operating environment specifications updated.
AC power cable warning (Japanese); STATUS LED update.
Wall-mounting added.
Logo updated.
Duration of press updated for reset to defaults.
Mediant 500 Gateway & E-SBC | Hardware Installation Manual
Document Name
Description
- iii -