Step 3: Install Batteries Into Transmitter; Step 4: Ir Sync To Create An Audio Channel - Shure QLX-D Series User Manual

Step 3: Install Batteries into Transmitter

① Accessing the Battery Compartment
Press the side tabs on the bodypack or unscrew the cover on the handheld as shown to access the battery compartment.
② Installing Batteries
◦ AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown
◦ Shure SB900 Battery: Place battery as shown (note polarity markings), remove AA Adaptor from bodypack transmitter,
stow AA Adaptor in door for handheld transmitter
Note: If using AA batteries, select a battery type from the transmitter menu to ensure accurate battery metering.

Step 4: IR Sync to Create an Audio Channel

1. Turn on the transmitter.
2. Press the sync button on the receiver. The red ir LED will blink indicating that sync mode is active.
3. Align the IR sync windows of the transmitter and receiver at a distance of <15 cm (6 in.). When the transmitter and re­
ceiver are aligned, the red ir LED remains on and the sync will automatically occur.
4. sync good appears on the display when IR sync is complete. The blue rf LED will illuminate indicating that the transmit­
ter is within range of the receiver.
Shure Incorporated
10/60