Shure QLX-D Series User Manual page 13

⑩ Sync LED
◦ Blinking: IR sync mode is enabled
◦ On: Receiver and transmitter aligned for IR sync
⑪ Power Cord Strain Relief
Secures power cord.
⑫ Power Supply Jack
Connection point for DC power supply.
⑬ Ethernet Port
For network connection.
◦ Amber LED (network speed):
off = 10 Mbps, on = 100 Mbps
◦ Green LED (network status):
off = no network link, on = network link active
flashing = rate corresponds to traffic volume
⑭ Receiver Reset
Press to restore receiver default settings.
⑮ Antenna Connectors
BNC connector for receiver antennas
⑯ Mic/Line Switch
Sets output level to microphone or line.
⑰ XLR Audio Output
Balanced (1: ground, 2: audio +, 3: audio - )
Shure Incorporated
13/60