Advertisement
Quick Links
Download this manual
See also:
Setup Manual
Advertisement
Related Manuals for Fujitsu MB2146-09
Summary of Contents for Fujitsu MB2146-09
- Page 1 FUJITSU SEMICONDUCTOR SS01-00022-1E SUPPORT SYSTEM MC Series BGM ADAPTER MB2146-09 OPERATION MANUAL...
- Page 2 This manual describes how to handle the F MC series BGM adapter. Be sure to read it before using the product. For information on the MCUs supported by this product, contact the Fujitsu sales or support representative. * : F MC is the abbreviation used for FUJITSU Flexible Microcontroller, which is a Fujitsu product.
- Page 3 Fire, Make sure that the symptom has been removed, then ask the Fujitsu Electric shock sales or support representative for repair. Never try to repair the product on your own as it is dangerous.
- Page 4 Indicates a potentially hazardous situation which, if not avoided by following the instruction stated, may result in minor or moderate injury CAUTION and/or damage to the product or the equipment to which the product is connected, to software resources such as data, or to other properties. Before moving the product, be sure to turn off all the power and unplug the cables.
- Page 5 (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.
- Page 6 1. Checking the Delivered Product Before using the product, make sure that your package contains the following items: BGM adapter * USB cable (1.8 m) Operation manual (Japanese version)) Operation manual (English version - This document) *: Hereafter called the adapter.
-
Page 7: Appearance And Part Names
2. Appearance and Part Names Figures 1 and 2 show the adapter appearance, major dimensions and part names. POWER LED User interface connector connector Interface cable 100 mm 100 mm Figure 1 Adapter Appearance (Top view) USB connector 40 mm Figure 2 Adapter Appearance (Front view) -
Page 8: Connecting The Adapter
3. Connecting the Adapter System Configuration Connect the adapter between the host machine and the user system so that the adapter can serve as an emulator under control of the host machine. For using emulator debugger software on the host machine, refer to the “S Workbench OPERATION MANUAL”. - Page 9 Connection to the User System Connect the adapter to the user system. Plug the user interface connector of the adapter into the adapter interface connector on the user system. When plugging the user interface connector, align its index mark (pin No. 1) with the adapter interface connector's counterpart.
-
Page 10: Specifications
Weight *1 : The maximum and minimum voltages depends on the MCU used. For details, contact the Fujitsu sales or support representative. *2 : The power consumption by the MCU used is not included. *3 : The connector part number is given below. - Page 11 Tool Reset Specifications A tool reset is a hardware reset by the adapter to reset the entire system of the MCU (including the BDSU module) on the user system. When both of the adapter power and MCU's user power are turned on, the tool reset is canceled automatically to enable the MCU to be evaluated.
- Page 12 Various options are available to the adapter. Purchase them as required. See Table 5 for the options. Table 5 Options Name Part number MCU * MBxxxxx *: The part number depends on the MCU used. For details, contact the Fujitsu sales or support representative.
- Page 13 SS01-00022-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM MC Series BGM ADAPTER MB2146-09 OPERATION MANUAL March 2004 the first edition FUJITSU LIMITED Published Electronic Devices Edited Business Promotion Dept.