Fujitsu F2MC-8FX Setup Manual page 11

Starter kit (ver. 5v)
Hide thumbs Also See for F2MC-8FX:
Table of Contents

Advertisement

Connecting BGM Adapter
Connect the BGM Adapter and the MCU Board, referring to "Figure 4 Connection of BGM Adapt-
er". The BGM Adapter and the MCU Board have an index mark (for pin 1) on its connectors. Align
the index mark on both sides.
Plug a USB cable into the BGM Adapter (the cable is bundled with the BGM Adapter).
Make sure that POWER-SW on the Evaluation Board is set to OFF (to the side of "
") before plug-
ging the cable.
Evaluation Board
JP2
JP1
Plug into BGM Adapter
MCU Board
BGM Adapter
Index mark
USB cable
(Bundled with BGM Adapter)
Power-SW
Figure 4 Connection of BGM Adapter
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

F2mc seriesMb2146-401-03Mb2146-09Mb2146-303Mb2146-401

Table of Contents