Table 6-2: External Inspection Check List - Tektronix MTG100, MTG300 Service Manual

MTG100 & MTG300 MPEG Generator Service Manual
Table 6 2: External inspection check list
Item Inspect for
Cabinet, front panel, Cracks, scratches, deformations,
and cover damaged hardware or gaskets.
Front panel knobs Missing, damaged, or loose
knobs.
Connectors Broken shells, cracked insulation,
and deformed contacts. Dirt in
connectors.
Carrying handle, bail, Correct operation.
cabinet feet.
Accessories Missing items or parts of items,
bent pins, broken or frayed
cables, and damaged connec
tors.
Cleaning Procedure Exterior. To clean the MPEG generator exterior, perform
the following steps:
1. Remove loose dust on the outside of the MPEG generator with a lint free
cloth.
2. Remove remaining dirt with a lint free cloth dampened in a general purpose
detergent-and-water solution. Do not use abrasive cleaners.
3. Clean the light filter protecting the monitor screen with a lint-free cloth
dampened with a gentle, general purpose detergent-and-water solution.
CAUTION. To prevent getting moisture inside the MPEG generator during
external cleaning, use only enough liquid to dampen the cloth or applicator.
Maintenance
Repair action
Repair or replace defective
module.
Repair or replace missing or
defective knobs.
Repair or replace defective
modules. Clear or wash out dirt.
Repair or replace defective
module.
Repair or replace damaged or
missing items, frayed cables, and
defective modules.
6 5