Starting The Programming Menu - Abus AZWG10020 Installation And Operating Instructions Manual

11.1 Starting the programming menu

1. In standby mode, the device displays the temperature, time, and
date.
2. Enter your passcode (default: 1234). The display now shows the
first menu point.
3. Use the arrow keys to scroll through the menu. Press a key from 1
to 0 to go directly to the desired menu item (for example, "9" to
access the event log).
4. Press ENT to edit the selected menu item.
5. To delete individual characters, press the ESC key.
6. To exit, press ESC. The changes are not saved.
7. Press ENT to confirm the data entered or selection made.
Example 1: Setting the contact details
1. Enter your user code. The initial contact details menu point is then
displayed.
2. Press ENT to select. Contact 01 is displayed.
3. Use the arrow keys to scroll through the contacts. Press a key
from 1 to 0 to go directly to the desired contact (for example, "4" to
go to contact 4).
4. Press ENT to edit the selected contact.
5. Use the letter keys to change the contact name.
6. Use the arrow keys to move the cursor to the right or left.
To delete individual characters, press the CLEAR key.
7. To confirm, press ENT.
To exit, press ESC. The changes are not saved. You can now
enter the number of the contact.
GSM/PSTN +29°C
12:07 01Jan13
↑↓ [ENT] to Select
Contact Details
↑↓ [ENT] to Select
Contact Details
Contact 04
Name 04
28 UK