Handset Registration - Yealink W60B Quick Start Manual

Handset Registration

You can register up to 8 handsets to one W60B base station. Each handset can be
registered to 4 different base stations.
When the handset LCD screen prompts "Unregistered!", long press
station till the registration LED flashes. There are two methods to register a new
handset:
Easy Registration:
1.Press the Reg soft key on the handset to register quickly.
Normal Registration:
1.Press the OK soft key on the handset, and then select Register Handset.
2.Select the desired base station and then press the OK soft key. The handset begins
searching the base station.
3.Press the OK soft key after searching a base station successfully.
4.Enter the base station PIN (default: 0000), and then press the Done soft key to
complete registration.
To register to multiple base stations, press the OK to enter the main menu, and select
Settings->Registration->Register Handset, then repeat steps 2-4.
Note: If the handset is registered to the base station successfully, the handset LCD
screen prompts "Handset Subscribed" and "Base NO."( last 4 characters indicate
the base station's MAC address).
If the handset LCD screen prompts "Searching for Base", check if your base
station is powered on or not.
5
on the base