Handset Registration; Basic Operations - Yealink W60B Quick Start Manual

Handset Registration

4
Note: If the handset is registered to the base station successfully, the handset LCD screen prompts "Handset
Subscribed" and "Base NO."( last 4 characters indicate the base station's MAC address). If the handset LCD
screen prompts "Searching for Base", check if your base station is powered on or not.

Basic Operations

5
Handset Name
5A
To rename the handset:
1.Press the OK key to enter the main menu, and then select Settings->Handset Name.
2.Edit the value in the Rename field.
3.Press the Save soft key to accept the change.
Volume Adjustment
5B
Press or when the handset is idle or ringing to adjust the ringer volume.
Press or during a call to adjust the receiver volume of speakerphone/earpiece /headset.
Easy Registration:
4A
1. Press the Reg soft key on the handset to register quickly.
Normal Registration:
4B
2. Press the OK soft key on the handset, and then select Register Handset.
Select the desired base station and then press the OK soft key.
The handset begins searching the base station.
Press the OK soft key after searching a base station successfully.
Enter the base station PIN (default: 0000), and then press the Done
soft key to complete registration.
To register to multiple base stations, press the OK to enter the main menu,
and select Settings->Registration->Register Handset, then repeat steps 2-4.
04