System Rom - Omron NT600M Series Operation Manual

Models
Memory Capacity and
Number of Screens
1-4-3

System ROM

NT600M
Host I/F Unit
NT600M-LK201 (RS-232C) (see note 1)
NT600M-LK202 (RS-422A)
NT600M-LK201 (Host Link) (see note 1)
NT600M-RT201 (SYSMAC BUS)
NT600M-LB122-V1 (C200H) (see note 1)
NT600M-LK201 (see note 1) (Host Link)
NT600M-LB122-V1 (C200H) (see note 2)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
If an equivalent is not used, the capacity of the memory backup battery may
not be sufficient.
Type Memory
capacity
SRAM 32K bytes
128K bytes
EPROM 64K bytes
128K bytes
256K bytes
EEPROM 32K bytes
Screen memory capacity varies according to which Screen Data Memory
Board is installed. The screen memory capacity, in turn, determines the num-
ber of screens that can be registered. Use the table below as a guide to se-
lect the amount of memory suitable for your needs.
Screen memory capacity
32K bytes
64K bytes
128K bytes
256K bytes
Note The table above is strictly a guide. If the messages or other display data per
screen increase, the number of screens that can be registered will decrease.
Likewise, if the messages decrease, the number of screens that can be reg-
istered will increase.
Purchase the System ROM according to the NT600M and Host Interface Unit
models that are used.
NT600M-DT122/211
NT600M-DN122/211
NT600M-SMR01-EV1
NT600M-SMR02-EV1
---
---
Model
RAM22-15 HM62256ALP-15 (Hitachi).
RAM13-10 HM628128LP-10 (Hitachi).
ROM-KD-B M5M27C512AK-12 (Mitsubishi)
ROM13-12B HN27C101AG-12 (Hitachi).
ROM23-15B M5M27C201K-15 (Mitsubishi)
EER22-20 HN58C256P-20 (Hitachi).
Number of registered screens
Mostly messages: 40 screens
Mostly graphics:
Mostly messages: 120 screens
Mostly graphics:
Mostly messages: 250 screens
Mostly graphics:
Mostly messages: 600 screens
Mostly graphics:
NT600M-DF122
Section 1-4
Recommended memory chips
15 screens
40 screens
100 screens
200 screens
NT600M-DT122
NT600M-DT211
---
---
NT600M-SMR31-E (Direct connection
can be used when version 4 of the
Support Tool is used.)
NT600M-SMR32-E (Direct connection
can be used when version 4 of the
Support Tool is used.)
7