Menus; Transferring Data To And From The Support Tool - Omron NT600M Series Operation Manual

Initialization
3-2-2

Menus

Using System Keys
Operation
Press the Buzzer Key, Up Key,
and Down Key simultaneously.
Press the Up Key.
Press the Down Key.
Press the Enter Key.
Quit
1, 2, 3... 1.
Selecting Items
Selected item
Quit Quits and return to normal operation.
Transmit Mode Shifts to Transmit Mode.
Select when transferring data between the NT600M and Support Tool. For details, refer to 3-3

Transferring Data to and from the Support Tool .

Maintenance Mode Shifts to Maintenance Mode.
Used to check the setting status of the NT600M and conduct self-testing.
Expansion Mode Not used. Reserved for future function expansion.
34
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The System Menu is called up by using the the system keys during opera-
tion. The System Menu can always be displayed regardless of the PT mode.
If there is no key input for 10 seconds after the System Menu has been
called up, the System Menu will be exited and RUN Mode will return.
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
Pressing the Up Key and Down Key while the Buzzer Key is being held down changes
PT modes and menus in the following ways:
RUN Mode System Menu
System Menu RUN Mode
Maintenance Mode previous screen or RUN Mode
Transmit Mode RUN Mode
Moves the bar cursor upward.
Moves the bar cursor downward.
Selects the menu at the position of the bar cursor.
Leave the system menu and return to operation by either of the following
methods.
Select "Quit."
OR
2. Press the Buzzer Key, Up Key, and Down Key simultaneously.
In addition, if there are no key inputs within 10 s of calling up the system
menu, the system will automatically return to normal operation.
To select an item, move the bar cursor to that item and press the Enter Key.
V1.x
Version no.
Content
Function
Section 3-2