Mac Clone - TP-Link Archer C8 User Manual

again. If you wish to activate
Internet connection to remain active at all times, enter "0" in the
Otherwise, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
Connect Automatically -

option, check the radio button.
Connect Manually -

After a specified period of inactivity (
Internet connection, and you will not be able to re-establish your connection automatically as
soon as you attempt to access the Internet again. To use this option, click the radio button. If
you want your Internet connection to remain active at all times, enter "0" in the
field. Otherwise, enter the number in minutes that you wish to have the Internet connecting
last unless a new link is requested.
: Sometimes the connection cannot be disconnected although you specify a time to
Caution
because some applications are visiting the Internet continually in the background.
Idle Time
Click the button to save your settings.
Save
Note:
If you don't know how to choose the appropriate connection type, click the
the router to automatically search your Internet connection for servers and protocols. The
connection type will be reported when an active Internet service is successfully detected by the
router. This report is for your reference only. To make sure the connection type your ISP provides,
please refer to the ISP. The various types of Internet connections that the router can detect are as
follows:
Connections which use PPPoE that requires a user name and password.
PPPoE -

Connections which use dynamic IP address assignment.
Dynamic IP -

Connections which use static IP address assignment.
Static IP -

The router cannot detect PPTP/L2TP connections with your ISP. If your ISP uses one of these
protocols, then you must configure your connection manually.
5.2.2

MAC Clone

Choose menu "
Advanced
WAN on the screen below, Figure 5-9.
Archer C8 AC1750 Wireless Dual Band Gigabit Router
Connect on Demand
Connect automatically after the router is disconnected. To use this
You can configure the router to make it connect or disconnect manually.
Max Idle Time
Network MAC Clone
, check the radio button. If you want your
Max Idle Time
), the router will disconnect from your
Detect
", you can configure the MAC address of the
field.
Max Idle Time
Max
button to allow