Dual Band Selection; Wireless Settings - TP-Link Archer C8 User Manual

An address code that determines the size of the network. Normally use
Subnet Mask -

255.255.255.0 as the subnet mask.
Note:
1) If you change the IP Address of LAN, you must use the new IP Address to log in the router.
2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time, while the Virtual Server and DMZ Host will
not take effect until they are re-configured.
5.3

Dual Band Selection

Choose menu "
Advanced
for your router. It is recommended that your computers and devices running video and voice
applications use the 5GHz band, while your guest access and computers that are only browsing
the web use the 2.4GHz band.
5.4 Wireless 2.4GHz
Figure 5-12 Wireless menu
There are six submenus under the Wireless menu, shown in Figure 5-12:
,
WPS Wireless Security
. Click any of them, and you will be able to configure the corresponding functions.
Statistics
5.4.1

Wireless Settings

Choose menu "
Advanced
settings for the wireless network of 2.4GHz on this page.
Archer C8 AC1750 Wireless Dual Band Gigabit Router
", and you can choose the working frequency
Dual Band Selection
Figure 5-11 Dual Band Selection
,
Wireless MAC Filtering
Wireless 2.4GHz Wireless Settings
Wireless Settings
,
Wireless Advanced
", you can configure the basic
,
and
Wireless