TP-Link Archer C8 User Manual page 49

- Check the radio button to select one diagnostic too.
 Diagnostic Tool
- This diagnostic tool troubleshoots connectivity, reachability, and name resolution
Ping

to a given host or gateway.
- This diagnostic tool tests the performance of a connection.
Traceroute

Note:
You can use ping/traceroute to test both numeric IP address or domain name. If
pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain name
is not, you might have a name resolution problem. In this case, ensure that the domain name
you are specifying can be resolved by using Domain Name System (DNS) queries.
 IP Address/Domain Name
connection you wish to diagnose.
Specifies the number of Echo Request messages sent. The default is 4.
 Pings Count -
Specifies the number of data bytes to be sent. The default is 64.
 Ping Packet Size -
Time to wait for a response, in milliseconds. The default is 800.
 Ping Timeout -
 Traceroute Max TTL -
path to search for the target (destination). The default is 20.
Click to check the connectivity of the Internet.
Start
The
Diagnostic Results
If the result is similar to the following screen, the connectivity of the Internet is fine.
Archer C8
Figure 5-105 Diagnostic Tools
- Enter the IP Address or Domain Name of the PC whose
Set the maximum number of hops (max TTL to be reached) in the
page displays the result of diagnosis.
AC1750 Wireless Dual Band Gigabit Router