TP-Link Archer C8 User Manual page 16

Primary/Secondary DNS -

These DNS Servers
Otherwise, the DNS servers will be assigned dynamically from your ISP.
Note:
If you find error when you go to a website after entering the DNS addresses, it is likely that
your DNS servers are set up improperly. You should contact your ISP to get DNS server
addresses.
Click the button to save your settings.
Save
2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting,
select . The Static IP settings page will appear as shown below.
Static IP
Enter the IP address in dotted-decimal notation provided by your ISP.
IP Address -

Enter the subnet Mask in dotted-decimal notation provided by your ISP,
Subnet Mask -

usually is 255.255.255.0.
Enter the gateway IP address in dotted-decimal notation provided by your
Default Gateway -

ISP.
Primary/Secondary DNS -

provided by your ISP.
Click the button to save your settings.
Save
3. If your ISP provides a PPPoE connection, select
should enter the following parameters in the screen below.
Archer C8 AC1750 Wireless Dual Band Gigabit Router
If your ISP gives you one or two DNS addresses, select
and enter the primary and secondary addresses into the correct fields.
Figure 4-4 Static IP
Enter one or two DNS addresses in dotted-decimal notation
PPPoE/Russia PPPoE
Use
option. And you