TP-Link Archer C8 User Manual page 46

 Get IPv6 prefix delegation
temporary IPv6 address is set to the WAN port, and the LAN port advertise IPv6 address by
RADVD or DHCPs.
- The IPv6 address assigned by your ISP dynamically.
 IPv6 Address
Click the button to renew the IPv6 parameters from your ISP.
Renew
Click the button to release the IPv6 parameters from your ISP.
Release
If your ISP gives you one or two DNS IPv6 addresses, select
and enter the
Servers Primary IPv6 DNS
Otherwise, the DNS servers will be assigned from ISP dynamically.
- Enter the DNS IPv6 address in dotted-decimal notation provided by your ISP.
 Primary IPv6 DNS
 Secondary IPv6 DNS
by your ISP.
Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
 Get IPv6 with Unicast DHCP
applications. If you can't get the IPv6 Address normally, you can choose Unicast. (You
generally need not to check this option).
 IPv6 Address Assign Type
(Stateless address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol
for IPv6) Server.
SLAAC
IPv6 Address Prefix
•
DHCPv6 Server
- the length of time a network user will be allowed to keep connecting to the
Release Time
•
router with the current DHCPv6 Address. Enter the amount of time (in seconds) that the
DHCPv6 address will be leased. The time range is 1~691200 seconds. The default value
is 86400 seconds.
- Displays the LAN IPv6 Address.
IPv6 Address
•
Archer C8 AC1750 Wireless Dual Band Gigabit Router
- Get a temporary IPv6 address and IPv6 prefix from the ISP, the
and
- Enter another DNS IPv6 address in dotted-decimal notation provided
- A few ISPs' DHCP servers do not support the broadcast
- There are two types of assignation for IPv6 address: SLAAC
-The Prefix of IPv6 Address
Use the following IPv6 DNS
into the correct fields.
Secondary IPv6 DNS