Recording Options; Report Options - Abus AZWG10020 Installation And Operating Instructions Manual

12.3.6

Recording Options

Long Play
When activated (ON), spoken messages have a maximum recording length
of 30 seconds.
When deactivated (OFF), spoken messages have a maximum recording
length of 15 seconds. The recording quality is higher in this case (default).
Automatic Recording
With this option it is possible to record any sounds or voices in the area of
the device when an alarm is triggered.
If this option is activated (ON) and any input is triggered, then the micro-
phone is switched on and recording starts. The recording is then saved as a
"memo". The recording can be called up through remote access (see the
"Remote functions" section) or using the memo function on the device itself
(see "Memo function – play").
An output of type "Message Waiting" also switches if such a memo exists.
When deactivated (OFF), no messages are caused to be recorded by the
trigger (default).
12.3.7

Report Options

Use Auto Report

To regularly check whether your chosen transmission path is functional
and whether the destination numbers can be reached

To prevent the wireless provider from disabling your wireless connection.
This can happen if there is no activity and no calls placed from this con-
nection for a long time (when using pay-as-you-go or prepaid cards).
Auto Report
When activated (ON), the device will automatically dial the programmed
telephone numbers and send the "location message".
(See menu item Call Routing  Auto Report  Auto Report On)
When the function is deactivated (OFF), no auto reports are started (default).
Note: The auto reports must be confirmed by the recipient on the telephone,
or else the number will be dialed again repeatedly!
Report Time

Report Time:Here you can set the desired time at which the auto report
is to start (the default is 12:00 noon). Only full hours are possible.

Report Day: Here you can set the desired day of the week for the auto
report to start (the default is Mo).
So, Mo, Tu, We, Th, Fr, Sa, or daily

Report Interval: Here you set the desired time interval of how many
weeks are to pass between auto reports (the default is 1 week).
28 UK