Scope Of Delivery; Main Features - Abus AZWG10020 Installation And Operating Instructions Manual

Gsm/pstn dialer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 57
Dusty devices must be cleaned. You can clean dust from the air vents
using a vacuum cleaner or compressed air. If necessary, you can re-
move the dust with a brush.
You can clean the surface using a cloth slightly dampened in soapy
water. Only use suitable microfiber cloths for high-gloss surfaces.
Do not allow water to penetrate inside the device.
Do not clean the device in a dishwasher.
Do not use sharp, pointed, abrasive, or corrosive cleaning materials or
hard brushes.
Do not use chemicals.
Do not use flammable liquids for cleaning the device.
6.

Scope of delivery

1 x GSM/PSTN dialer
1 x installation and operating instructions
1 x GSM antenna
2 x housing screws
1 x installation material (2 wall plugs, 2 screws)
Sticker with key functions
7.

Main features

The device transmits a wide variety of information to landlines and mobile
phones. You can either operate the device as a standalone version or con-
nect it with the alarm control panel. Most alarm control panels have a voltage
output for external devices. This also connects the device with the backup
battery.
GSM
The device interacts directly with the GSM cellular network. The device
is not tied to any wireless provider. It can be operated with normal SIM
cards.
PSTN module
With this additional module, the device can also be operated on a wired
analog phone line.
8 inputs
The device has eight trigger inputs. Each input can be assigned to a
voice message and/or a text message (SMS). The device can also
send a voice message and/or text message (SMS) if the trigger of the
input has been reset. Normally you connect the inputs with "communi-
cation" outputs or alarm outputs (sirens) of alarm control panels. How-
ever, you can also connect other devices to the inputs, such as smoke
detectors or temperature sensors. The device allows you to program
the polarity of the trigger. The device can be triggered with a positive or
negative voltage potential. The voltage potential can be applied or re-
moved.
6 UK

Advertisement

Table of Contents
loading

Table of Contents