Basic Settings; Menu Functions; Contact Details - Abus AZWG10020 Installation And Operating Instructions Manual

1. Press the ESC button repeatedly until the display shows the fol-
lowing.
2. Press ENT to exit the programming menu. The standby screen is
now displayed.
Alternatively, you can remain in the programming menu by
pressing ESC.

11.3 Basic settings

In most operational cases, configuration of the following basic settings is
sufficient:
Menu item
Contacts
Messages
Access Codes
Date & Time
Note, however, the factory settings of the other menu items, which
can be found in Section 14.1 "Overview of Programming Func-
tions", marked with "
E.g.:

The triggering polarity is negative (menu item "Trigger Polarity")

GSM is used as the primary transmission path (menu item "Line Priori-
ty")

When an input is triggered, messages are sent to all contacts (menu
item "Call Routing")
The following section describes all the possible settings in the menu.

12. Menu functions

12.1 Contact Details

The device can manage up to 10 contacts. The following parameters are
assigned to these contacts:

Contact name:
Each contact name can have up to 16 characters. Used to uniquely
identify the destination so you can better remember the destination to
which you want to send.

Contact telephone number:
Description
Used for creating and managing up to ten contact
names and the telephone numbers, and for selecting
the relevant message type (text or voice).
Used for managing voice and text messages.
Setting of the access codes for programming and
operation
Used for setting the system time and date.
".
f
21 UK
Press [ENT]
To Leave Menus